Talos-security DK1400 Series Surveillance Kit User Manual User Manual

H.264 Networking Surveillance System USER MANUAL

10 TIP: When using the remote control to enter password and camera titles, select

11 3.3 MENU TREE Use the mouse to control the DVR and navigate the menus. The tre

12 3.4 SYSTEM OPERATION 3.4.1 USER LOGIN 3.4.1.1 STARTING THE SYSTEM To power th

13 3.4.2 GUI OPERATION The main menu; "DISPLAY", "RECORD", &q

14 Click and drag the cursor to adjust settings. Click "APPLY" to sav

15 CHANNEL: Click to select all channels or just one channel for schedule recor

16 DHCP Select "DHCP" for the DVR to automatically negotiate an IP ad

17 3.4.2.4 SEARCH Click "Search" on the main menu to enter into th

18 LOG SEARCH: Click to access the log search interface. See below for more detai

19 BACKUP You can backup files directly from the DVR onto a USB flash drive. The

2 We highly encourage our customers to bench test their system prior to insta

20 3.4.2.5 DEVICE SETUP Click "DEVICE" on the main menu to enter into t

21 FORMAT USB: Select to format a USB flash drive; recommended for the flash driv

22 Email: Enable = On, Disable = Off SSL is a security link transport protocol th

23 PTZ Control From the live view screen, right click for the drop down menu. Cl

24 MOBILE Click "MOBILE" to enter the mobile phone settings interface.

25 Using the remote control: Use the direction key to move the cursor to the des

26 DATE/TIME SETUP Click "TimeDate" to enter the time and date setting

27 VIDEO/AUDIO SETUP Click A/V Setup to enter the A/V settings interface. NOR

28 SYSTEM INFORMATION Click "INFORMATION" to enter the system inform

29 REBOOT: Click to restart the DVR. This is common after making important syst

3 INDEX 1 INTRODUCTION_________________________________________________________

30 4.1.2 Log into NVClient The first time you launch NVClient you will s

31 4.1.2.2 Common Setup Tab Under server manage click on "Add" to ente

32 NOTE: The user name and password used to log into the DVR may or may not be

33 4.2.1 Sign up for a dynamic domain name at DYN.com Click: "Get Started

34 4.2.2 Set up the DVR for access using a dynamic domain name service 4.2.2.1

35 Click "Apply" then "Exit" then reboot your DVR for chang

36 4.2.3.2 Administration tab Click: Administration tab Remote Management: Click

37 4.2.3.4 Setup tab It ahs been our experience that some systems might require

38 NOTE: The user name and password used to log into the DVR may or may not be

39 4.3 USE INTERNET EXPLORER TO OPERATE THE DVR FROM ANY PC CONNECTED TO THE INT

4 1 INTRODUCTION 1.1 PRODUCT INTRODUCTION This compact DVR has all the functio

40 4.3.2.2 Security Tools: On the IE toolbar, click on the "Tools" tab

41 4.3.3 Log into the DVR Enter your domain name (over internet, WAN) or the DV

42 4.3.4 WEB SERVER INTERFACE There are four setting options in "Live view&

43 4.3.4.2 REPALY (IE Browser) You can play saved video from the DVR using the we

44 4.3.4.3 REMOTE SETTING Click "REMOTE SETTING" to enter the Remote Se

45 Color Adjust setting allows you to change the video and color levels making ca

46 Rec Enable allows you to decide if a video channel is recorded. Unit of Pack a

47 PTZ SETTING Click "PTZ Setting" to enter the Pan Tilt Zoom camera se

48 MOBILE SETTING Click "Mobile" to enter the mobile settings interf

49 ADVANCED SETTING Click "Advanced Setting" to enter the advanced sett

5 PTZ interface RS485 × 1; + / - Data storage Support 1 SATA HDD; 300GB-2T

50 Maintenance System Operate Operation allows you to set the DVR to original fac

51 Hard Disk Info List Displays the hard drives installed into the DVR and their

52 LOCAL SETTING Click "Local Setting" to enter the local setting inter

6 2 INSTALLATION 2.1 PRODUCT OVERVIEW 2.1.1 Front Panel Indicators NO. NAME

7 2.2 HDD INSTALLATION Follow the steps below to install the hard drive into the

8 4）Place the hard drive over the screw holes and isolation pads as shown below.

9 3 DEVICE OPERATION 3.1 MOUSE OPERATION The mouse is the primary input device f